 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Rack-Mount Solid State Power Amplifiers CPI Solid Inside and Out C - Band High Power SSPAs Model S5CI Series 125 and 225 Watt C-band Solid State Power Amplifiers--Efficient and Compact With CPI Brick Inside. C-Band Rack Mount Solid State Power Amplifiers CPI-Built RF Brick Inside Global Applications With CPI-built RF brick inside and plenty of thermal margin, SSPA is rock-solid, highly efficient and easy to maintain. Provides up to 125 or 225 watts of power in a 5.25" rack-mountable unit covering the 5.850 - 6.425 GHz frequency band. Multi-Carrier Digital Operation Meets International Safety Standards EN-60950 and EN-60215, Electromagnetic Compatibility 2004/108/EC and Harmonic Standard EN-61000-3-2 to satisfy worldwide requirements. Worldwide Support Highly linear: excellent AM/PM, phase noise and spectral regrowth performance. Simple to Operate Backed by over three decades of satellite communications experience, and CPI's worldwide 24-hour customer support network that includes sixteen regional factory service centers. User-friendly microprocessor-controlled logic with integrated RS422/485 computer interface, digitally controlled attenuator, and optional Ethernet interface. 811 Hansen Way P.O. Box 51625, Palo Alto, CA 94303 tel: +1 (650) 846-3803 fax: +1 (650) 424-1744 e-mail: marketing@satcom.cpii.com www.cpii.com/satcom C-B a n d SPECIFICATIONS, S5CI Rack-Mount SSPA Electrical Electrical (continued) 5.850 to 6.425 GHz (to 6.725 GHz optional) 125 W (50.97 dBm) or 225 W (53.50 dBm)1 100 W (50.0 dBm) or 200 W (53.0 dBm)1 Group Delay (in any 80 MHz band) Primary Power Power Consumption Power Factor RF Output Monitor 0.03 ns/MHz linear max. 0.003 ns/MHz 2 parabolic max. 1.0 ns pk-pk ripple max. 100-240 VAC 10%, single phase; 47-63 Hz 800 W typ. for 125 W SSPA; 1500 W typ. for 225 W SSPA 0.95 min. -55 dB 3 nom. wrt output OPTIONS: * 1 RU Remote Control Panel * Redundant and Power Combined Subsystems * L-Band BUC * Extended Frequency Range (to 6.725 GHz) * RF Input and Output Monitors * Ethernet Interface Frequency Range RF Output Saturated, min. P1dB, min. Small Signal Gain (at max. Gain Adjustment Range Gain Setting Resolution 70 dB min. (at max. gain setting) 23 dB 0.1 dB Gain Stability Over -10C to +50C 1.5 dB At constant temp. and drive 0.25 dB Small Signal Gain Slope Small Signal Gain Variation Input VSWR 0.04 dB/MHz max. 0.3 dB pk-pk across any 40 MHz band; 1.5 dB pk-pk across 575 MHz 1.3:1 max. 1.3:1 max. -25 dBc max. at 3dB total backoff from P1dB -60 dBc max. at P1dB -60 dBc max. at P1 dB (-55 dBc w/ BUC option -50 dBc below 10 kHz -20 [1 +log F(kHz)] dBc, 10 kHz to 500 kHz -85 dBc above 500 kHz -80 dBW/4 kHz in transmit band, -135 dBW/4 kHz from 3.7 to 4.2 GHz 10 dB below IESS phase noise profile, max. 1.0/dB max. at 3dB backoff from P1dB Environmental (Operating) Ambient Temperature Relative Humidity Altitude 0C to +50C operating 95% non-condensing 10,000 ft. with standard adiabatic derating of 2C/1000 ft., operating; 50,000 ft., non-operating 440 VDC (line to line protection); 560 VDC (line to ground protection) 2 ms/250 J (line to line protection) 10,000 A repetitive * DC Power Supply Redundancy Module * External Receive Band Reject Filter * High Power Transient Voltage Surge Suppressor (TVSS) Output VSWR 3rd Order Intermod Harmonic Output Spurious Residual AM High Power TVSS Option Clamp Voltage Energy Absorption Peak Current Shunt Mechanical Cooling RF Input Connection RF Output Connection RF Output Monitor Dimensions (W x H x D) Forced air with integral blower Type N female CPR-137 waveguide flange, grooved Type N female 19.0 x 5.25 x 26 in. (483 x 134 x 661 mm); 19.0 x 7.00 x 26 in. (483 x 178 x 661 mm) with DC Power Supply Redundancy Option 76 lbs (34.6 kg) typ., no options Noise Power Density Phase Noise AM/PM Conversion Weight SSPA with optional redundant hot-swappable power supplies Note 1: For 5.850 to 6.725 GHz option, output power is lower. Check technical description or contact your CPI representative for details. Certificate Number: 30515 For more detailed information, please refer to the corresponding CPI Technical Description. Note: Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. MKT 197, ISSUE 8 05/08 PDF |
Price & Availability of SSPA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |